Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
1,000 results
Sorted by:
09-06-2018
10:23 AM
...W634A ArubaOS 6.5.1.4 build 58698 I have set up the following: LAN: Vlan 1 - 10.57.30.32/29 - 10.57.30.33 - Ports 0 - 2 WAN: Vlan 10 - 192.168.0.0/24 - 192.168.0.117 - Port 3 Inter-vlan routing...
Labels:
3 weeks ago
....7c.59.fc.6b.fb.9f.fc.ff.ff.37.ef:02 hostname "WR_CORESWITCH" module 1 type jl259a trunk 24 trk1 trunk ip routing interface 22 dhcp-snooping trust exit snmp-server community "public" o...
08-12-2014
07:59 AM
...urrent network. In the user guide as well as the datasheets for the S1500-24P it states that only one Routed VLAN Interface can be configured to the switch. Is this c...
03-08-2010
07:59 AM
I cannot seem to get inter-VLAN routing working properly at all. MMC OS is 3.4.1.0. I have VLAN 1 which is physically connected to the controller and contains our main subnet. I have VLAN 191 w...
02-25-2010
02:53 PM
...et up as the gateway for both. Both have inter-VLAN routing enable, however I can not ping across? No firewall polices have been created or applied. This is a factory default, with the 2 VLANs created a...
03-17-2016
05:12 PM
...each the internet through DSL without any problem. Now i need so disable inter vlan routing cause clients can reach hosts on the management vlan. please i need neccesary command line to make that h...
- Tags:
- ------ MandP -----
06-26-2018
10:21 AM
i have two aruba 6000 controller working as redundancy. they are connected to two nexus 7k in full redudancy. the mangement vlan is 232 for controller. i have two SSID's, S...
Labels:
08-07-2019
06:46 AM
I am changing my Layer 3 switch to a 2930F (JL261A) and I currently have 8 interfaces intervlan routing on my old switch and I need more, my question is: In this switch model, how many interfaces d...
09-10-2014
07:00 PM
...C-VoWLAN-vap_prof" share 100 enforcement hard report-interval 1 The strange thing is that the inter-vlan routing worked fine when I made the changes but failed within a few hours. Reverting to a b...
- Tags:
- 7210
06-22-2018
10:47 AM
...am having trouble enabling the layer 3 inter-VLAN routing. I am using a couple test VMs with static IPs to test the environment before making the cutover. Yes, the gateway IP of the test V...
