Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
40,000 results
Sorted by:
10-22-2015
09:28 AM
On my Master Controller, I have a few logs being sent to a logging server. I have set the Master to send User & Security Logs. I need to do this for all Local Controllers as well and we have 55 o...
04-12-2013
10:09 AM
It appears that configuration settings are not being pushed from our master controller to the local controllers. The settings on the local controllers are "grayed out" (e.g. I cannot click a...
05-06-2019
10:46 AM
...ub) folders. So I don't need to connect to the controllers / manged devices for configuration. But what about show commands (except show configuration)? Is there any way to issue them on the MM for the...
Show results in replies (8)
-
No, that is not possible. You can connect directly to a MDC from the MM using the mdconnect c...
-
The bandwidth between the MCs and MMs to be able to run all debug commands and logging to a s...
-
...sue the command from Mobility Master. On the MD it just says inherited from /mm in every line.
-
...older 5 there is a controller cluster running a few APs. Let's assume the ap-groups and most profiles f...
-
SSH into the controller (MD). Type "show configuration effective detail" and it will tell y...
-
Ok, to be honest that is sad because mobility master is advertised as centralized mangement p...
-
...crollback in putty to the max and log the session 4. This will show you all the commands as they were e...
-
Nobody here who can help me to understand?
08-15-2019
02:54 AM
...master controller is Aruba 7030 serving 1000 APs and 300 APs are being served by local controller 7010. Currently, both the controllers are on OS 6.5. The main reason for the upgrade is to f...
Show results in replies (9)
-
...wo controller are in the same cluster profile, all load from all APs will be shared across them. &n...
-
...es they are, it is a tower where we have distributed APs from Ground level to 33rd floor. "Do you w...
-
...nd client roaming between controllers. Will go through the docs to get more clarity. As of now, we c...
-
...xisting controllers from the search after loading 8.3, and keeping it in standalone without MM. Will it b...
-
...igration tool is not always intuitive. It can be advantageous to configure a network from s...
-
...asier. I will use a new 7030 first as a backup controller to terminate APs then will upgrade the o...
-
...f upgrading the existing master local setup from OS 6.5 to 8.3. I was using the upgrade tool which g...
-
...adio and if the customer's main goal is to leverage that, feature it is best to deploy an MM in the...
-
...n both existing WLCs. The client is not in the situation to invest in hardware or software. We h...
10-24-2019
12:59 PM
I need a help as I am struggling with it since few days and I am not able to find a solution. For some reasons my 7205 Controller is not able to join to the Aruba MM. The c...
02-05-2019
02:04 AM
Hi all, last week I was at a customer who ist planing to get smoothly from 6.5.x to 8.3.0.x. In 6.5 he has a Master - Local setup. What is the best way to upgrade the local controllers to 8...
Labels:
Show results in replies (6)
-
...hat you already have the configuration for both controllers already in the MM, and you have to c...
-
...ested and that you have the production 6.x controller already plugged into the correct port. It is...
-
...activate status on the MM I see that the "cert upload" is the only field which is not up to date. All...
-
...hysical access to the controllers and provision them by hand. what steps i need to think of? is the...
-
can this be the solution? https://community.arubanetworks.com/t5/Controller-Based-WLANs/How-to-set...
-
...aving to much trouble getting the MDs to the MM.
08-04-2018
11:40 PM
...P's being attached to the 8.x controllers? or is this something that can be enabled at a future date? I know that I need to update the DHCP option 43 settings to point the ap's to the new controller...
Labels:
Show results in replies (9)
-
...o all of the sites tunnel back to the controller anyways? Do you generally have all the same S...
-
...ertificate will be applied to all of your controllers under MD in the hierarchy.
-
...need to roll back to the old 6.5.x controller, does CPSEC cause additional pain for a possible r...
-
...nitially only one controller will be migrated to the new environment while the configuration is being t...
-
...erhaps this isn't necessary. If I were to set it up anyway, would it cause problems? It sounds l...
-
...xisting controller into the Mobility Master environment? CPSEC whitelisting is an option for new a...
-
...CPSEC whitelisting... are you talking about if I run the migration tool for adding my existing controller...
-
...nterface name>" to see if there have been any throttles or any other errors. TAC would know b...
-
...bsp;http://community.arubanetworks.com/t5/Controller-Based-WLANs/ArubaOS-8-Fundamentals-Guide/ta-p/4...
10-28-2016
09:58 AM
...xisting mobility domain so that it downloads all the config from the master, and then promote it to master so we can use it (temporarily) as an independent standalone test controller for 6.5.1. &n...
Labels:
09-12-2018
05:30 AM
...uccesful respons, It doesn't really seem to do anything. This is the response I get from the API, but it doesn't set my controller discovery to static. { "ap_prov": { "a...
09-19-2016
10:23 AM
...entralized licensing, and this is my main concern. If I make this new controller the Master, will my licenses transfer over, or will all of my Local controllers and APs need to be rebooted (all 600+ A...
Show results in replies (4)
-
...xisting master, you're likely going to need to using the licensing site and transfer them to the new controller...
-
...eboot all local controllers. From my understanding, if the Master is offline for a bit u...
-
...the equation. In addition, you would have to set a local controller ipsec key on the new controller...
-
...eeding to be done is decommission these two Master controllers, and create a new set of Master controllers...
