06-25-2019 11:44 PM
Q: How can we search for, or exclude, specific data from the "show..." commands at the switch CLI? A: How to find or exclude specific information using "show" commands at the switch CLI. T...
- Find more articles tagged with:
- Aruba HPE Switch
- command line interface
- event log
- Higher Ed
- Higher Educaction
09-18-2018 11:19 AM
Q: How many concurrent SSH sessions are supported and how to Kill a particular SSH session? A: Aruba HPE Switch allows 5 concurrent SSH sessions. Executing "show ip ssh" will show the list o...
03-23-2017 02:24 PM
...he same network. Hence communication between Airwave and devices in 172.17.0.0/16 subnet might fail. Solution: To fix this we can disable or delete the docker0 interface. However instead of p...
Show results in comments (5)
...ORE SWITCH. So upgrading ClearPass took out their core network. Needless to say it was a tough one to t...
...his really bad decision fixed and change the address of the docker0 interface to its loopback or a 1...
...his, or used 169.254.0.0/16 as mentioned in my previous post.
....x space or the loopback address from the start. After a recent upgrade my IAP sites s...
@mattGeorge, thanks for the info. Unfortunately the problem came up without us creating or e...
05-13-2019 01:06 AM
05-13-2019 01:06 AM
11-13-2011 06:42 PM
Question One of my systems guys is trying to use a bridge setting in a VMware host. He claims it works at his house. it is supposed to place the MAC address of the virtual client on the physical w...
07-03-2014 03:33 PM
Question: What should I do if an Aruba controller or Mobility Switch is missing the TPM and/or factory certificates? Environment: This article applies to the Aruba 7200, 6...
07-10-2014 03:17 PM
...elease of ClearPass Policy Manager 6.3.2, we can deploy only on Virtual Server VMware -ESXi. Deploying CPPM on Xen or MS Hyper-V would be an un-supported deployment and we would recommend you to file a...
06-26-2014 04:28 PM
This article applies to Aruba Mobility Controllers running ArubaOS version 188.8.131.52 and below. If your controller supports clients behind a wireless bridge or virtual clients on VMware...
07-04-2014 02:42 AM
Q: How to Remote Telnet or SSH Session from the Controller A: Starting from ArubaOS 6.5, an administrator can initiate a remote telnet or SSH session from the controller to a r...