...hich AP group it assigned to and etc. The RAP wired MAC address is needed in order for the certificate based RAP to establish the IPSEC tunnel successfully with the controller.
There are various ways t...
...Configuration: 7008) (config) #show switches
All Switches
------------
IP Address Name Location Type Model Version Status Configuration State Config Sync Time (sec) Config I...
...equires the external server which hosts the captive portal page to be allowed for http/https access in the client initial role. To perform this configuration we need PEFNG license in the controller.
I...
...own
ip link set dev docker0 down
Delete the interface
brctl delbr docker0
Modify the configuration to use the new IP address
vi /etc/sysconfig/docker
add: --bip=x.x.x.x/xx to t...
Q: How to Remote Telnet or SSH Session from the Controller
A: Starting from ArubaOS 6.5, an administrator can initiate a remote telnet or SSH session from the controller to a r...
...alls to each other and also enables applications like ‘Desktop Sharing’ and ‘File Transfer’. The proposed ALG for Lync will allow Aruba to provide value-added services like QoS, Call Admission Control...
...bsp;
NOTE: Bitvise SSH Server is free for NON-COMMERCIAL use. You must purchase this software.
Configuration:
Navigate to below URL to download bitvise software:
https://www.bitvise.com...
Q: TFTP Server or Server IP configurationfor IPv6 deployment to download AP image.
A: Prior to 8.1 release, "server-ip" was accepted only for IPv4 address. This prevented IPv6 APs to d...
...sing WebUI:
Navigate to Configuration> Ports
Enable the “Make Port Trusted” checkbox
Enter the VLANs to be allowed on the port and mark them trusted or untrusted....
