07-16-2014 07:36 AM
In Aruba OS 6.3, can we use "Shared Location" on Clearpass to allow Apple TVs within a certain location or with a certain FQLN? How to configure APs to a certain location in Aruba OS 6...
07-26-2020 02:25 PM
11-13-2011 07:41 PM
...nto Linux Single User Mode. 1. Reboot the server with CTRL-ALT-DELETE. 2. When the blue boot screen pops up (depending on what OS you have, you may have an AirWave logo or CentOS or another OS l...
03-27-2017 06:44 AM
07-03-2014 02:58 PM
...AP) using Aruba Activate. If your Instant Access is not in the factory default state. Please reset the IAP into factory default state and reboot the IAP. To verify the Airwave configuration push f...
05-29-2014 02:42 PM
...erification To verify the Airwave configuration push from Aruba Activate, 1. Login to the Instant Access Point. 2. Click on Support -> AP System Summary -> Run 3. On the output, you s...
11-24-2015 06:33 AM
07-03-2014 05:13 PM
...nto read-only. You would not be able to make any changes from the Instant UI. All the changes has to be made through the AirWave server . This article applies to all the IAPs running a m...