05-10-2019 12:20 PM
07-03-2014 05:16 PM
...n the AirWave server is configured as “Manage Read/Write” mode. No configuration changes can be done using the IAP WebUI. All the configuration has to be pushed into the IAP through the AirWave s...
...D. Enabling this option would allow us to do config changes in MD. Before enabling local mode: (Aruba-MD) #configure t This controller is managed by a Mobility Master. Configuration c...
07-06-2014 08:21 AM
If using Airwave (AMP < 6.3), and allowing it to do configuration changes, please be aware of a major caveat. After making a configuration change on AMP, the AMP server will write a new startup-configur...
12-08-2016 03:12 PM
12-08-2016 03:11 PM
...ynamicConsole: The BLE chip functions as an iBeacon combined with beacon management functionality. However, when the link to the controller is lost, the BLE chip temporarily enables access to the A...
- Find more articles tagged with:
- arubainstant 126.96.36.199-4.0
- arubainstant 188.8.131.52-4.1
- arubainstant 184.108.40.206-4.1
- instant access point
12-28-2015 01:13 AM
05-16-2018 04:18 AM
Q: What are the configurations which cannot be overridden at the lower level nodes in AOS: 8.x? A: There are certain configuration, which cannot be overridden at the lower level nodes. Below a...
12-08-2016 02:42 PM
Q: How to connect a managed controller to a MM? ASE Link: Go to the solution A: Summary This solution shows how to initially configure a Managed Controller (MC) also k...