Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
40,000 results
Sorted by:
04-27-2012
06:53 AM
Can you boot a normal AP105 into a Instant IAP105 Controller? I do this for normally testing for my local sites with local controllers, but would like to test the configuration I've done for a site i...
Show results in replies (6)
-
And to further answer that question, no, you cannot add a campus AP to an IAP virtual controller.
-
...dd an AP105 to a IAP Group?
-
...ne up per site in Australia and check the issue and resolve it, I have a site without a physical controller...
-
...P (just in case you want a controller in your network after you have purchased IAPs).
-
...bsp; You cannot drop ship an IAP-105 into a campus environment and have it register with the controller...
-
A regular campus AP can not be converted to an IAP. There are some regulatory issues that govern t...
08-03-2016
09:52 AM
Hey all, I have been trying to convert this pesky iap105 to an AP105 for the past few days now. from the command line, i have tried running the convert-aos-ap command specifying the mode and aruba-m...
Labels:
Show results in replies (4)
-
Found the solution. I ran out of licenses so it wouldn't let the conversion from IAP to RAP f...
-
Hey there, I tried to convert it on a lab network, but it can't connect to the aruba master (w...
-
Have you tried to reset via the reset button? Just curious...otherwise, bring it up on an isolate n...
-
...sn't even seeing it come online. it came online yesterday but i assigned it to an ap-group and then w...
05-14-2014
08:40 AM
...alled and told wireless was down. I could not reach the assigned IP for the virtual controller. Rebooting all the Aruba switches ended up fixing it, but we still have some on Cisco 3750 switches t...
- Tags:
- ap225
Labels:
Show results in replies (5)
-
The bug Scott mentioned is scheduled to be fixed in the 4.1 release in a couple of weeks. I...
-
...ps connected to the VLAN in eth1 will become slaves including the current VC master. This is a f...
-
...weak a few settings, so I just reset up the controller. Every other AP in the cluster connected to...
-
When the network went down, was the IAP-225 cabled up to the second ethernet port? There i...
-
Please continue to work with TAC for troubleshooting this issue. Mixing AP models should n...
10-23-2019
09:59 AM
...esolution in order to discover the controller. however is there a more indepth/low level explanation of this as i am curious if the node list is prioritized over the knew DHCP option. Thanks,
05-09-2018
07:50 AM
I'm an Aruba noob. I have five IAP-325-US and they were recently updated from v6.5.4.6 to v8.3.0.0 via the GUI. I just bought a new IAP-325-US and want to add it to this network because I g...
Labels:
Show results in replies (3)
-
...nd manually installed it. Then i was able to update to v8.3 via the GUI. Now it's joined to the c...
-
...nd one of those problematic ap's decided to join virtual cluster in second try... Five pcs I had to u...
-
I forgot to add that the AP shows an update available and then errrors. I'm truncating t...
06-06-2018
08:07 PM
Just deployed a pair of VMMs on a Hyper-V 2016 host. The host has the processors identified int the ArubaOS 8.3.0.0-Virtual Appliance-Installation Guide, and local SSDs. The VMMs were built to t...
Labels:
05-31-2019
12:48 PM
We purchased the Aruba MC-VA access licenses for Aruba Virtual Mobility Controllers (VMC). However, I cannot locate the OVA file(s) to download. I have a service ticket open but does a...
Labels:
2 weeks ago
...y VC but not this AP-335. The AP-335 is running 8.5.0.4_72900 The AP-335 does seem to bring up its own instnace of VC and will act as Master, but it will not join my e...
Labels:
Show results in replies (4)
-
...equires a mobility controller to operate. If you (or someone else) tried to install the I...
-
I shoould note that it only launches it's own VC on the initial boot after reset. After t...
-
...) and am trying to add the AP-335 (running ArubaInstant_Lupus_8.5.0.4_72900 ) The A...
-
...ill not upgrade the other automatically. Upgrade both IAPs to the same firmware version first t...
06-05-2016
09:45 PM
...'m not sure if there is any difference other than the fact I need a controller. Its not a big deal to toss a controller in the rack for these, but beyond purchasing that, will I need a...
04-10-2017
12:29 PM
Hi guys, I am new in Instant technology. I have to implement a cluster of 15 IAPs in customer site. I am testing in a demo lab, where I have a cluster of 2 IAPs. The master IAP has IP 1...
Labels:
Show results in replies (9)
-
...ust the single IP address of the virtual controller? Or if you have an account used by receptionist to...
-
Yes, you do need to configure a Virtual Controller IP to use a single IP for management. The "M...
-
Correct, the Virtual Controller IP will move between AP's in the event of a failure. &n...
-
Or via SSH :) There will be no re-direct there unless you use the Virtual Controllers IP address.
-
Friends, I know this is not the forum, however, I need help setting up snmp in the IAP / Virtual Controller...
-
...ried to log in to a slave IAP in my cluster by https, 192.168.1.139 in my case, and the browser is r...
-
....100? On the other hand, I have tried to log in to a slave IAP in my cluster by https, 192.168...
-
Hi zailon0, I have just tested the SSH option and re-direction with VC IP and you are r...
-
...trategy is to allow all access points to have DHCP, but configure a VC IP that can always be r...
