Hello all... I am aware of the 1024 device limit and 65 IAP per cluster limit, but what is the user experience for the 1025 device, does it just not connect? Thanks, Randy
Hi all, can anyone please tell me if the limit of 16 IAPs in a single cluster of 9x APs has been exceeded with the last firmware versions? Thanks in advance.
05-28-2014 06:17 AM
Hi Guys, I know that except IAP-93, we have no limit about number of IAP on a Cluster. But I need some datasheet, papper or documentation that prove this. Where I can get? I...
03-23-2018 02:06 PM
I have a cluster with IAP 103 e IAP 205. The controller master is IAP 205. Some IAP 205, the speed are been limited. the devices are connected with AC and speed are 170 mbps . the firmware is 6.5.4...
02-27-2019 01:48 PM
Hi community, I have an IAP-205H which gets stuck at booting. I have seen several posts about this, but in many of them the device was an AP instead an IAP, which is not my case. I am sure m...
07-16-2015 08:49 PM
Hi there, Just received a new IAP-277, connected it to the existing Aruba AP and it attempt to start but the status light turn solid red. Looking at the file I can see some error but I can't tell w...