...ffer, it would assign the same to the VC assigned subnetinternally Therefore, any wireless client connected to VC assigned SSID, would also receive all the DNS server IP addresses as part of DNS s...
...nd is used to identify a IAP group on Aruba Central. Aruba Central, looks for this key every time a virtualcontroller comes up in order to identify the AP-Group and thereby push the existing c...
Environment : This article applies to all Aruba Instant platforms and versions.
No. If you upgrade the master/virtualcontroller, that will cause all t...
...xample of non-Airwave managed configuration can be seen in the IAPVirtualController WLAN settings (Figure 1) and the individual IAP settings (Figure 2). Figure 1 highlights the 'Zone' field that is used....
Question: How do I find the master (virtualcontroller) in the IAP cluster?
Product and Software : This article applies to all Aruba Instant platforms and versions.
&n...
...nd the respective local controllers will receive this configuration from the master controller. Thus an administrator will not be able to enable or disable CPPM Enforce Registration knob, on individual l...
...onfirm you have set up bypass controller discovery, when the UAP inIAP mode you can execute the below command:
70:3a:0e:c1:2e:72# show ap-env
Antenna Type:Internal
Need USB f...
Product and Software: This article applies to ArubaOS 6.1 and later. Each virtual AP profile configuration now includes the ability to block traffic between clients that use that virtual AP. T...
Question How to find the management mode of an IAP cluster from virtualcontrollers command line interface?
Environment: This article applies to Aruba Instant Access Points....
Q: 1. Why does the slave IAP send DHCP requests to the VC in a cluster?
2. Why we shouldn't DHCP on IAP up-link ports when we have a VC assigned SSID?
A: 1. In a cluster, DHCP server for t...
