...se the docker interface if needed.
Configuration: We can run the following commands from support shell of airwave:
Stop the service
service docker stop
Bring the interface d...
...rovisioning the RAP using the ArubaInstant Convert option, you will need to enter it manually into the controller. Alternatively, if the entries are available in the Activate server, you can configur...
...ption is very straight forward. One need to add the serial no's and mac address of the InstantAccessPoints. It allows only 32 devices to be added here.
CloudActivation K...
...or Arubacentral. We might required to change the key if it is matching with some other Cluster already present in Airwave. That might happen because of multiple reasons, if we switch the IAP f...
Environment
This article applies to ArubaInstant™ AccessPoints running ArubaInstantOS 6.2.1.0-3.3.0.0 or higher and managed by ArubaCentral.
The amount of data t...
Q: How to Remote Telnet or SSH Session from the Controller
A: Starting from ArubaOS 6.5, an administrator can initiate a remote telnet or SSH session from the controller to a r...
Requirement:
I want to upload a file on 8.2.4 Airwave server. However, I do not have either a Linux machine or a Mac machine to SCP the file.
Requirements:
Airwave version 8.2.4...
Q: How do I quickly search a specific Instant AP or Mobility Access Switch on ArubaCentral?
A: Central provides a standard web-based interface that allows you to configure and monitor Instant...
Q: How many concurrent SSH sessions are supported and how to Kill a particular SSH session?
A: Aruba HPE Switch allows 5 concurrent SSH sessions. Executing "show ip ssh" will show the list o...
