04-09-2014 04:52 AM
Dear all, I want use IAP 275 in the outdoor and I want use the mesh for the backhaul, Is there any one that tries it before? Is it recommended or not
12-19-2014 01:49 AM
hi, I'm going to configure a mesh link with 3 IAP 275 and I Have some question: 1. What is the average distance between two IAP ( in open area ) . 2.Can an IAP configured as a mesh p...
08-17-2015 08:36 AM
Dear All, i have try the mesh with IAP 275 using the Firmware version 22.214.171.124 , but it was not working at all , have any one of you tray it before. Regards
04-16-2018 01:56 PM
Re: AP-175 Mesh not working with encryption - Airheads Community I am having the same problem as the thread titled "AP-175 Mesh not working with encryption" with AP-275s c...
Hi, I have created a Mesh using IAP 275 access points. I followed the procedure in the latest release notes. 1. Connect the IAPs to a wired switch. 2. Ensure that the VC key is s...
08-13-2015 09:18 AM
07-04-2016 02:32 AM
Hi guys, I'm planning to design a point to point outdoor AP within a campus. will IAP-277-RW(integrated directional antenna connectors) can support up to 650m of distance? &n...
Show results in replies (4)
...martphone / tablet) to connect to an IAP-275 / IAP-365? In a mesh network between two IAP-275 (open a...
...IGHLY dependent on client) AP-275 mesh range easily 500m, we have done up to 1km, but n...
So 650m is supportable with the 277 *IF* a) the RF channel is clean and there's n...
The MST200 is an 11n AP (not 11ac) so it will not be as fast, it also is 5Ghz only for mesh, so i...
11-09-2015 06:51 AM
Hello Dears, If I have many outdoor AP's (IAP 275), and the 5 GHz Signal overlaps between them, can I isolate them into separate Clusters (3 ~ 5 AP's each)? Meaning I can select manually w...
08-07-2016 11:48 PM
Hi, I did an outdoor site survey with IAP-275s. After the site survey was done the customer decided he wanted to mesh access points instead of cabling them all. It's a fairly l...