Migration of Aruba deployments from ArubaOS 6 to ArubaOS 8 involves a few more steps and precautions than performing a simple controller image upgrade. This chapter covers topics i...
...sed to configure licensing in an ArubaOS 8.0 deployment.
ACRONYMS USED IN THIS SOLUTION
MM - Mobility Master
MC - Mobility Controller. Can be MM managed, standalone, etc.
PEF - P...
Q: How to configure "LMS IP" address in Aruba OS 8.0?
A: LMS-IP configuration was always been part of AP system profile within an AP Group. Starting Aruba OS 8.0, LMS IP for AP r...
Q: Can APs terminated on Mobility Master or Standby?
A: MM (Mobility Master), including both Master and Standby can be used only for configuring and managing the devices in the c...
Requirement: Enabling portfast for APs with ethernet ports for wired client support.
Solution: A new parameter is introduced to enable PortFast/PortFast on Trunk to reduce the time taken for...
Q: Check points before applying changes on the Controller running Aruba OS 8.0.
A: Aruba OS 8.0 provides various check points before applying configuration changes to the Controller(s). &n...
Q: How to configure clustering of 8.x Aruba Mobility Controllers?
ASE Link: Go to the solution
A: Summary
Clustering is a new feature introduced in AOS 8.0 that enables s...
...achine (VM) and the resources required for the VM to be functional:
Quad-core Core i5 1.9 GHz processors with hyper threading enabled
8 GB RAM
Migration Tool VM Requirement
Listed below a...
Problem: Migration tool incorrectly detects current AOS version of controller.
Diagnostics:
We need to check Migration log on the migration tool and we will see below error message.
[2...
Summary : This article discusses how AirWave 8.0.X versions can be installed on RedHat (RHEL) systems.
Introduction : Installation of AirWave is supported on Red Hat Enterprise Linux 6...
