APs are provisioned into AP groups. The AP group has all the configuration the APs will need. This includes the SSIDs, RF frequencies, authentication requirements, and firewall policies. However, n...
...eed a few things otherwise you wont be able to provision it. When i say provision i mean configure this thin AP.
Here is the requirements(be sure the AP got them all so it can successfully c...
Requirement: How to provision the Instant AP in Aruba Central using templates and variables?
This article applies to all Instant APs that are managed by Aruba Central.
Solution: Usual c...
Q: Allow Zero Touch Provisioning when NTP server is unreachable.
A: In Instant 6.4.4.6-4.2.4.0, IAP supports zero-touch provisioning through Aruba Activate even when the default NTP s...
...estination [console | buffer | syslog]
The key-chain command is only required on the Provision switch.
Verification Run the following command to verify that the neighbourship is U...
Problem: Unable to provision the Switches to the Aruba Central
Diagnostics: 1. Checked the firmware on the Switch.
2. Firmware version of the Switch was: YC.16.05.0004
3. The m...
Prerequisites:
In order to provision an Aruba AP, the following conditions have to be met:
The AP has to be connected either directly to the controller or to the wired network.
Upon booting u...
Q: What are the difference between Thick and Thin disk provisioning in Virtual Machine
A:
In Thick provisioning we have two methods. One is Thick provision Lazy Zeroed and Thick provision...
