...tatus as shown below :
SNMP : You can also get the uptime information using SNMP OID HOST-RESOURCES-MIB::hrSystemUptime.0 Following is an example of SNMP get from a...
Q: Explanation for the column “Device Uptime is Reliable” in Device Uptime report
A: Based on the Up/Down events of the device, this column gets updated to "Yes/No" in the generated report....
Requirement: There were couple of TAC cases that were open for system uptime being reset after 496 days of uninterrupted service.
The system uptime counter on 2910 switches running a W.15...
Q. I have AMP 6.0.x and I just did a Poll Now of my Airespace controller. After I did that, AMP reported that Device Uptime indicates that device has rebooted. What can I do? A. This is a k...
Join this session to hear first-hand how to deliver Network-as-a-Service with Aruba products. Explore how Aruba Central's multi-tenancy, APIs and managed-service-mode can help you deliver Networks-as...
OP: @jlanguirand
Attached is a short document outlining spinning up a new Aruba Central site. This can be helpful as a quick 'how-to' if never done before.
...luster with Aruba Central. Central Uptime, Central Status, and Central Login Status are the parameters which would be helpful to understand the connectivity duration.
...ontroller Output:
(ArubaLocal1) #show ap active
Active AP Table
---------------
Name Group IP Address 11g Clients 11g Ch/EIRP/MaxEIRP 11a Clients 11a Ch/EIRP/MaxEIRP AP Type Flags Uptime...
