Attached presentation from Dallas Airheads 2011 summarizes basic steps on how to start troubleshooting an Aruba remote access point (RAP) connectivity.
Airheads dallas 2011 r...
Introduction :
Product and Software: This article applies to all Aruba controllers and ArubaOS versions. How to telnet Aruba RemoteAP? NOTE: Aruba OS allows to telnet to AP...
Setting up RemoteAP is very straightforward if you make a checklist of what you need to do and procedures to ensure that those items are configured correctly. "Set and Confirm" is a good way to be s...
Q: Starting with AOS 6.5.2.x, we can convert the Campus AP / RemoteAP back to IAP mode by executing a command in controller.
A: We can convert the IAP campus AP / RemoteAP for the b...
...eployment scenarios based on scalability requirements per site, security enforcement for mobile devices among others.
2012 ah vegas remote networking fundamentals from AirheadsSocial
...p address of ap> backup-partition
Licensing
RemoteAP capable with addition of ArubaOS RAP license
PEF is NOT needed at all for RAPs, only if you want to do split tunnel (policy based r...
The AP authorization-profile specifies which configuration should the remoteAP download before it is authenticated at the remote site. By default these yet-unauthorized APs are put into the t...
...ase you want to use it as a RemoteAP, you need to convert it to a RAP. NOTE: These access points require Aruba Instant 3.0 or later to operate as an Instant AP or ArubaOS 6.1.4.0 or l...
