...he IAP cluster; • Move one of the IAP to the remote site, without wired uplink it will become mesh point. Verification: Below commands can be used to validate Mesh...
Show results in comments (6)
how can i used the wired link form the mesh point to extend the wired network.
...nclude the 215, 275, 315, 325 all to work together and support Mesh. I have an IAP/VC group m...
In our setup, we use the mesh technology to bridge the wired network to another building. This is w...
...re fine (active: no" So the IAP-325 also says "Mesh: N/A" in the VC while the IAPs-275 say b...
...xtended-ssid active:yes" and Mesh not working. Reboot didn't help. Do I need to delete all existing S...
...upport Meshing with 802.11ac.
07-07-2014 03:09 PM
03-13-2012 03:10 PM
03-27-2012 01:16 PM
...ther IAPs automatically and cause deployment issues. From 4.1, IAP mesh will be disabled in the factory default configuration. Customer has to enable meshing through explicit configuration steps. &n...
03-24-2017 07:12 AM
11-04-2014 12:53 PM
09-03-2015 05:26 AM
Remote & Branch Networking Fundamentals #AirheadsConf Italy from Airheads Community Remote & Branch Networking Fundamentals: Your mobile workers need simple, a...