...rioVeryHIgh vlan 200 inbound
#
Also activate "qos trust dscp" on switchports uplink as an sample below.
interface GigabitEthernet1/0/1
port link-type trunk
port trunk p...
...anager does not receive the Event to get the Uplink toggled. Thus shutting down uplinkport won't toggle the Uplink as the uplink- VLAN's Operstate still being UP.
Tried it in lab setup a...
...pply user role TEST_DUR-3045-1_7Z4q to macAuth client 005056831001 on port 2: user role is invalid.
In the above log event client MAC is 005056831001 and DUR name is TEST_DUR-3045-1.
&n...
...cenario: When a Client VLAN is configured on the IAP, which is not allowed or configured on the IAP’s uplink device: any client which connects to such an SSID will not be able to obtain an IP a...
Introduction : This article outlines the procedure to configure two ethernet uplinks for an Aruba Instant Cluster.
Feature Notes :
Following are the feature not...
This allows configuration of ACL rules on Uplinkports of an IAP.
The ACL rules defined on uplinkport of an IAP are applied for the whole cluster.
Environment : This is a b...
Problem: Https is notworking when http is disabled on HPE 1920S 48G 4SFP Switch
Diagnostics:
when switch is running on PD.02.06, and if we enable https and disable http, HTTPS doesn't&n...
...egistration Protocol) on these switches
If Airgroup services seem to work on some IAPs and not on some IAPs, we should confirm this using the outputs of the following for the working...
...irectly to the AP-70 eth1 port, a crossover cable has to be used, or a hub or switch has to be in between.
Note: Uplinkports (eth0) on all Aruba APs are Auto-MDX. Downlink ports on all other A...
...pply user role TEST_DUR-3045-1_7Z4q to macAuth client 005056831001 on port 2: user role is invalid.
In the above log event client MAC is 005056831001 and DUR name is TEST_DUR-3045-1.
&n...
