Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
7,000 results
Sorted by:
05-26-2014
02:30 AM
Hello, We have the following hardware: RAP-155 4G Huawei E3276 USB modem Aruba7210 Controller with ArubaOS 6.4.03. Our ISP parameters are : APN: internet.se Access Number: *99# W...
- Tags:
- RAP155
- USB Parameters
Show results in replies (9)
-
Hi Peter, To configure Huawei E3276 you only need to do this. You should not need to c...
-
...nd change to correct APN adress in it. I have used the Huawei E3276-150 for this so it s...
-
Hello, We received the Huwaei E3276-150 4G modem last week, and began testing with the RAP...
-
...ases, unplug and replug the AP after a config change. This E3276 requires AOS 6.4 or I...
-
...f Huawei E3276 modems, and on checking closer, the recommended type of modem for this purpose is t...
-
You may try setting additional modem parameters to: Device Type: huawei-cdc Device I...
-
...plink on the RAP-155 USB port. There is certainly higher latency via the 4G uplink than when the RAP-155...
-
Hi Jonas! Thanks for your response! Vi have placed an order for the Huwaie E3276-1...
-
...s per your suggestion, later when I get home, where I have the RAP-155. Best regards P...
11-21-2014
01:57 PM
Hi, I have an RAP-155 and having trouble to get i working with a 4G usb dongle. Modell: Huawei E3276s - 150 and this should be supported according to the documentation. http://w...
12-13-2016
11:56 AM
...assword: ppp Access Number: *99# SIM Lock disabled IAP-215 Version 6.5.0.0-4.3.0.1_57133 Cellular configuration: AP1_Meshportal# sh cellular conf Comm USB Plugged in: Vendor_ID=1...
Labels:
05-29-2015
06:50 AM
I'm putting together a lab test for a customer. I'm using a Huawei E3276 USB modem (from the Supported List), which after upgrading to InstantOS 4.1.1.6 is detected correctly by the RAP. H...
Labels:
06-21-2018
03:33 AM
...ject. Here is the configuration I have for the ap-group I'm using for this RAP. USB Device Identifier: 0x20202033 USB modeswitch parameters: eject /dev/sr0
Labels:
Show results in replies (4)
-
wrote: Not sure if I need to get the modeswitch message somewhere and add that to the parameters...
-
hello, please try setting the usb modeswitch to " -v 2020 -p 2030 -K" which i...
-
...emote-ap usb-type option usb-dev "0x20202033" usb-dial "ATD*9...
-
Hi, Thanks for your reply. I tried it with those parameters - no luck :( Not sure if I n...
01-05-2011
07:56 AM
...Key, One of this is a Huawei K4505 Can you please help me on how to configure the 3GUplink on both the controller and a RAP5? On the controller I’ve followed the instructions on the user g...
Show results in replies (7)
-
...0 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1521 Rev= 0.00 S: Manufacturer=Vodafone Group (Huawei...
-
...odeswitch parameters (eject sr0, eject sda, and rezo)? Currently we don't support third party utilities l...
-
...This will attempt to "eject" the virtual cdrom driver device. From the usb ports info both sr0 a...
-
...east in fw 6.1 yes, it is supported but on both the controller and the RAP5 you have to issue a m...
-
...o add support for this modem. Thanks. Hello ! We are testing this now and have same Huawei...
-
...odem mode after that. From the USB device info it's showing that the two interfaces are classified as usb...
-
...odem mode after that. From the USB device info it's showing that the two interfaces are classified as usb...
11-01-2019
02:05 AM
While logged into a 8320, (aoscx 10.03.50) how do you list files on mounted USB drive? --N ----- # Thanks # Gracias # Merci # ありがとう # Danke # Spasiba # 감사합니다 # Toda # Cheers # D...
Labels:
10-20-2014
12:47 AM
Hi everyone, any know the USB parameters (USB Device Identifier, USB Dial String and USB mode switch) for the following 3G modem: Huawei K4203? I need them for RAP3 deployment. Thanks, Gian
02-28-2019
12:23 PM
Would anyone know when versions 6.5.4.11, 8.3.0.6 or 8.4.0.1 will be available for download? When I go on the Aruba website under "Instant" the latest versions on Standard Release are 6.5.4.3 or 8.3...
Labels:
06-16-2014
06:14 PM
Recently we upgraded our controllers from OS version 6.1.3.9 to 6.3.1.8 Before, we have only been using RAP-2 access points as RAP's. Since the EOL of that model was announced, we decided t...
- Tags:
- RAP155
Labels:
