Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
10,000 results
Sorted by:
08-12-2019
10:49 AM
....0 0.0.0.0 10.10.20.253 10.10.20.253 is the ip address of the firewall. When I try to SSH to a brach the switch uses the "Outgoing-interface" policy to select the SSH source a...
02-23-2017
04:54 AM
...concern that traffic flow for both corporate and guests are taking the same path from controllers. I have the following doubts in this deployment. What will be the source ip-address when g...
Labels:
10-30-2019
07:28 AM
...uestion, is there any way to raise the total number of allowed sessions? 8325# sh ssh server sessions all-vrfs SSH sessions on VRF default : IPv4 SSH Sessions : Server IP : X.X.X.X C...
02-28-2014
07:21 AM
I'm trying to authenticate against a TACACS server group on a MAS. Despite configuring the RADIUS source interface and NAS IP to the loopback, the switch uses a random SVI as it's source T...
Show results in replies (7)
-
...hange to the controller-ip may have an impact as that is also the interface that the GRE is sourced f...
-
So just to confirm, when the controller-ip on this one stack is set to a loopback TACACS does not source...
-
...acacs source interface knob. Here is the idea portal entry I have on this. https://n...
-
I tested changing the controller-ip to several different SVIs on the switch and it's still not w...
-
No, the TACACS packets are being sourced from a different SVI. The "controller ip" is set a...
-
No problem. The controller IP interface would be a decent enough workaround if it worked c...
-
...he controller-ip to an SVI won't have any other affect I may change it just as a test. T...
05-26-2013
01:59 PM
...hat the controller didn't use the RADIUS source interface/IP that was specified. Granted, RADIUS and TACACS are different, I thought the controller might still use that IP specified but it did n...
12-04-2014
12:03 PM
We have noticed brute force attacks on the outside interfaces on our controllers. I want to disable all management access on the outside interface (SSH, Telnet, WebUI, please fill in any I missed). T...
- Tags:
- controller
03-04-2019
02:34 PM
...o specify keys seems to relate to the 'manager' or 'operator' accounts? ip ssh public-key manager username <username> <key> We've got multiple admins working with p...
12-19-2018
06:55 AM
I am fairly new to HP / Aruba switches. I am wanting to restrict telnet & ssh access based on the source IP. I setup a standard ACL permitting the 3 IPs that have access, but I...
06-04-2019
11:58 AM
....se,aes192-ctr, aes192-cbc,aes128-ctr,aes128-cbc,3des-cbc MACs : hmac-sha1-96,hmac-md5,hmac-sha1,hmac-md5-96 Ses Type | Source IP P...
05-20-2019
10:48 PM
I managed to typo controllers ip when I provisioned ap. It seems that I can connect it with SSH because I know the static ip but ap won't accept any password. So is there way to access to AP when i...
Labels:
