Guru Elite

Re: Aruba6000-US

What VLAN that SSID is tied to is located in the Virtual AP profile.  On the controller, you can create a VLAN, assign it to a physical port on the controller as an access port or as part of an existing trunk and change the Virtual AP to that VLAN.

 

For example if I wanted to switch an SSID to vlan 8, I would do this:

 

config t

vlan 8

interface gigabitethernet x,y

switchport mode access

switchport access vlan 8

 

I would then go into the GUI, and find the Virtual AP that corresponds to the one I want and change it to 8...


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars