03-03-2014 11:22 PM - last edited on 05-13-2014 09:04 AM by Srynearson

I have seem soo many times people asking regarding in how many APs they need for certain sceanrios. And the only answers they get " it depends" but they never get a concrete asnwer...

This tutorial will show you how to calculate the numbers of AP you need based in information you can get by calculating the Airtime Needed for those devices.

Also to prove that the formula is working properly i took one of the Aruba success history and applied the formula!

This Tutorial will just calculate the aproximate number of APS needed, it does not take in consideration RF issues in the auditorium deployment or other similar things

__How to calculate number of APS for High Density__

I__ntroduction__

In this tutorial I will guide you in how and what you need to calculate the total number of APS in a High Density scenario, such as an Auditorium, Conference Room etc

__Information needed__

In order to calculate this you need to get some information of your client which is the following:

- Total of devices expected to be connected
- Minimum BW needed for each device
- Type of Devices expected(Laptops, Smartphones, Tablets)

__Formula components__

MBW = Minimum BW Needed for each device

RBW = Real BW of the Device

ND = Number of Devices

AP = Airtime Percentage

__Notes:__

Real BW of the Devices is the real TCP/IP Throughput which is around haft of the total raw speed

__Example 1 __

A laptop with a wireless card of 3x3:3 the raw speed of it is 450Mbps

The TCP/IP Throughput would be haft of it which is 225Mbps

__Example 2__

A smartphone with a wireless card of 1x1 the raw speed normally is = 65Mbps

The TCP/IP Throughput would be haft of it which is 30Mbps

__Formula 1__

(MBW/RBW)*100 = AP

__Formula 2 __

(AP*ND)/80 = Total of Radios

__Note:__

Remember that most of Aruba APS are dual radio which mean that each AP got 2 radios!(one 2.4ghz and the 5ghz Radio)

Example with real Aruba Deployment

Let take this scenario and fill the information we need by reading the document above:

__Filling basic information__

- Total of devices expected to be connected =
**100** - Minimum BW needed for each device =
(2Mbps for apps and 1Mbps for Video)**3 Mbps** - Type of Devices expected(Laptops, Smartphones, Tablets) = IPADS with a maximum raw speed of 100Mbps and TCP/IP Throughput of
(In the document implies that the IPAD provides 100Mbps Wireless speed Connection)**50Mbps**

__Formula 1__

AP = (MBW/RBW)*100

Let’s substitute the values

AP = (3Mbps/50Mbps)*100

AP = 6%

__Formula 2__

(AP*ND)/80 = Total of radios

Let’s substitute the values

Total of Radios = (6*100)/80

Total of Radios = 7.5 Radios

__Result:__

Total Amount of Aps 4( In this case 4 AP 135)

As you see the total APS is the exact number used on the Aruba Deployment.

__Conclusion__

With this formula you will be able to calculate the approximate number of APS needed in a High Density deployment such as an auditorium.

Remenber also that this will give you just the total of radios needed, as in the auditoriums you sometimes or at least i do, turn off the 2.4ghz band of some of the AP because of the overlapping. So for example 10 radios could be 7 APS, 3 of them with 2.4ghz and 5ghz on, and 4 on just 5ghz which give a total of 10 Radios.

Product Manager - Aruba Networks

Alternetworks Corp

Solved! Go to Solution.

- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator