12-12-2015 07:58 AM - edited 12-12-2015 08:02 AM
Hey All -
Had a few quick questions since transistioning to the Aruba line, have 4 IAP-225s in service spread across two floors in approx 3000 sq ft of space (2 on 1st floor, 2 on second floor - ceiling mounted)
It appear the min power level is set to 18 and max level is set to "Max" by default - with those settings I get the following:
Note the utilization across both 2.4 and 5.0GHz
I have client match enabled but it doesn't seem to be balancing the clients all that well since the clients are near all 4 access points.
Any suggestions for optimizing the configuration?
With adjusted power settings.
Solved! Go to Solution.