03-05-2017 06:15 PM
I've been setting up TACACS authentication with our HPE ProCurve switches, using a solution from the ASE
My ClearPass version is 18.104.22.168015
I modified the service to use AD Authentication, which is all working fine (checking an AD Group and mapping the appropriate enforcement profiles). I can authenticate to the switch using my AD Credentials fine like this
When i go and change the Device to an IP Address range (10.100.0.100-200) for the switches I want to authenticate using CPPM, the authentication stops matching the service and fails back to the default "[Aruba Device Access Service]" (or no service matched if i disable that default service)
Entering the Subnet or IP in the field works fine
I've posted some screenshots below for reference,
Solved! Go to Solution.