Controllerless Networks

Who Me Too'd this topic

Occasional Contributor I

How to force disconnect a client in Aruba Central

I have two networks, one I have setup in the Aruba Centtral demo and one is not.

 

I needed to change a password for an SSID. The virtual controller not connected to Aruba Central allows me to click on a client, and then the x to diconnect that particular client.

 

This is not available in either Virtual controller or Aruba Central interface when you have it setup in Aruba Central.

 

I found an old post from 2014 that explained to go to console on the AP with the client and run the clear client <mac address> but that command it no longer recognized.

 

Is there a way to force a client off the network while using Aruba Central?

 

Thanks,

Chuck

Who Me Too'd this topic