ArubaOS and Controllers

Who Me Too'd this topic

Occasional Contributor II

L2 bridging from ENET1 on RAP to ethernet port on master controller

I would like to give to a wired client connected on the ENET1 port of a RemoteAP (which terminates on the local switch) L2 access to the same vlan which is also configured on an Ethernet port on the master controller. So I would like to make a bridging from the ENET1 of the RAP through the local controller to the Ethernet port on the master controller. Is that even possible? And if yes, how?

Thank you in advance,

Stefan
Who Me Too'd this topic