login as: mnocadmin Pre-authentication banner message from server: | "ATTENTION! PLEASE READ CAREFULLY. | This system is the property of Mahindra and Mahindra Limited. It is for | authorized use only. Users (authorized and unauthorized) have no | explicit or implicit expectation of privacy. Any or all uses of this | system and all files on this system will be intercepted, monitored, | recorded, copied, audited, inspected, and disclosed to the Management of | Mahindra and Mahindra Limited. By using this system, the user consents to su > ch | interception, monitoring, recording, copying, auditing, inspection, and | disclosure at the discretion of Mahindra and Mahindra Limited. Unauthorized > or | improper use of this system may result in administrative disciplinary | action and civil and criminal penalties. By continuing to use this | system you indicate the awareness of and consent to these terms and | conditions of use. LOG OFF IMMEDIATELY if you do not agree to the terms | and conditions stated in this warning." | End of banner message from server Keyboard-interactive authentication prompts from server: | mnocadmin@10.2.3.86's password: End of keyboard-interactive prompts from server Press any key to continue Your previous successful login (as manager) was on 2021-09-15 16:56:36 from 10.2.52.72 CQA-Piller-CCTV# show logging -r Keys: W=Warning I=Information M=Major D=Debug E=Error ---- Reverse event Log listing: Events Since Boot ---- I 09/16/21 11:45:30 00179 mgr: SME SSH from 10.2.29.50 - MANAGER Mode I 09/16/21 11:45:29 03362 auth: User 'mnocadmin' logged in from 10.2.29.50 to SSH session W 09/16/21 01:51:59 05737 FFI: port 23-Excessive Multicasts. See help. W 09/16/21 01:27:01 00332 FFI: port 23-Excessive Broadcasts. See help. W 09/15/21 19:13:36 04242 auth: User 'mnocadmin' logout from 0.0.0.0 due to inactivity timer timeout for CONSOLE session W 09/15/21 18:13:36 00329 FFI: port 15-Excessive CRC/alignment errors. See help. I 09/15/21 18:13:18 03125 mgr: Startup configuration changed by CLI. New seq. number 18 I 09/15/21 18:13:02 00076 ports: port 15 is now on-line I 09/15/21 18:13:00 00077 ports: port 15 is now off-line I 09/15/21 18:12:37 00076 ports: port 15 is now on-line I 09/15/21 18:12:08 00077 ports: port 15 is now off-line I 09/15/21 18:11:47 00076 ports: port 15 is now on-line I 09/15/21 18:11:45 00077 ports: port 15 is now off-line I 09/15/21 18:11:40 00076 ports: port 15 is now on-line I 09/15/21 18:11:37 00077 ports: port 15 is now off-line I 09/15/21 18:11:34 00076 ports: port 15 is now on-line I 09/15/21 18:03:13 00077 ports: port 15 is now off-line I 09/15/21 18:03:07 00076 ports: port 15 is now on-line I 09/15/21 18:03:05 00077 ports: port 15 is now off-line I 09/15/21 18:03:02 00076 ports: port 15 is now on-line I 09/15/21 18:02:47 00077 ports: port 15 is now off-line W 09/15/21 18:01:58 00329 FFI: port 15-Excessive CRC/alignment errors. See help. I 09/15/21 18:00:50 00076 ports: port 15 is now on-line I 09/15/21 18:00:48 00077 ports: port 15 is now off-line I 09/15/21 18:00:42 00076 ports: port 15 is now on-line I 09/15/21 18:00:40 00077 ports: port 15 is now off-line I 09/15/21 18:00:37 00076 ports: port 15 is now on-line I 09/15/21 17:46:25 00077 ports: port 19 is now off-line I 09/15/21 17:46:24 00077 ports: port 16 is now off-line I 09/15/21 17:46:18 00076 ports: port 19 is now on-line I 09/15/21 17:46:18 00076 ports: port 16 is now on-line I 09/15/21 17:40:53 03125 mgr: Startup configuration changed by CLI. New seq. number 17 I 09/15/21 17:22:44 00184 mgr: Log cleared as a result of 'clear logging' command ---- Top of Log : Events Listed = 33 ---- CQA-Piller-CCTV# conf t CQA-Piller-CCTV(config)# show power-over-ethernet brief Status and Configuration Information Available: 370 W Used: 21 W Remaining: 349 W PoE Pwr Pwr Pre-std Alloc Alloc PSE Pwr PD Pwr PoE Port PLC PLC Port Enab Priority Detect Cfg Actual Rsrvd Draw Status Cls Type ------ ---- -------- ------- ----- ------ ------- ------- ------------ --- ---- 1 Yes low off usage usage 2.6 W 2.5 W Delivering 3 1 2 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 3 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 4 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 5 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 6 Yes low off usage lldp 8.0 W 7.5 W Delivering 3 1 7 Yes low off usage usage 2.6 W 2.5 W Delivering 3 1 8 Yes low off usage usage 2.7 W 2.7 W Delivering 3 1 9 Yes low off usage usage 2.6 W 2.5 W Delivering 3 1 10 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 11 Yes low off usage usage 2.6 W 2.5 W Delivering 3 1 12 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 13 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 14 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 15 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 16 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 17 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 18 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 19 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 20 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 21 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 22 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 23 Yes low off usage usage 0.0 W 0.0 W Searching 0 - 24 Yes low off usage usage 0.0 W 0.0 W Searching 0 - Refer to command's help option for field definitions CQA-Piller-CCTV(config)# poe Invalid input: poe CQA-Piller-CCTV(config)# po policy port-security portal power-over-ethernet CQA-Piller-CCTV(config)# power-over-ethernet poe-reset Use this command to reset the PoE controller to which the port belongs. pre-std-detect Detect and power pre-802.3af-standard devices. slot Optional - Specify a valid powered-slot list for power threshold setting or omit to set all powered-slots. threshold Set the threshold at which the system will send an excess power consumption notification trap. CQA-Piller-CCTV(config)# show po policy port-access port-security portal power-over-ethernet CQA-Piller-CCTV(config)# show power-over-ethernet brief Show PoE information for the specified slot. [ethernet] PORT-LIST Show PoE information for the specified ports slot Show PoE information of the specified slot. CQA-Piller-CCTV(config)# show power-over-ethernet 15 Status and Configuration Information for port 15 Power Enable : Yes PoE Port Status : Searching PLC Class/Type : 0/- Priority Config : low DLC Class/Type : 0/- Pre-std Detect : off Alloc By Config : usage Configured Type : Alloc By Actual : usage PoE Value Config : n/a PoE Counter Information Over Current Cnt : 0 MPS Absent Cnt : 0 Power Denied Cnt : 0 Short Cnt : 0 LLDP Information PSE Allocated Power Value : 0.0 W PSE TLV Configured : dot3, MED PD Requested Power Value : 0.0 W PSE TLV Sent Type : dot3 MED LLDP Detect : Disabled PD TLV Sent Type : n/a Power Information PSE Voltage : 0.0 V PSE Reserved Power : 0.0 W PD Amperage Draw : 0 mA PD Power Draw : 0.0 W Refer to command's help option for field definitions CQA-Piller-CCTV(config)# show interfaces brief Status and Counters - Port Status | Intrusion MDI Flow Bcast Port Type | Alert Enabled Status Mode Mode Ctrl Limit ------------ ---------- + --------- ------- ------ ---------- ---- ---- ----- 1 100/1000T | No Yes Up 100FDx MDI off 0 2 100/1000T | No Yes Down 100FDx Auto off 0 3 100/1000T | No Yes Down 1000FDx NA off 0 4 100/1000T | No Yes Down 1000FDx Auto off 0 5 100/1000T | No Yes Down 1000FDx Auto off 0 6 100/1000T | No Yes Up 1000FDx MDI off 0 7 100/1000T | No Yes Up 100FDx MDIX off 0 8 100/1000T | No Yes Up 100FDx MDI off 0 9 100/1000T | No Yes Up 100FDx MDI off 0 10 100/1000T | No Yes Down 1000FDx Auto off 0 11 100/1000T | No Yes Up 100FDx MDI off 0 12 100/1000T | No Yes Down 1000FDx Auto off 0 13 100/1000T | No Yes Down 100FDx Auto off 0 14 100/1000T | No Yes Down 1000FDx Auto off 0 15 100/1000T | No Yes Up 100FDx MDI off 0 16 100/1000T | No Yes Down 1000FDx NA off 0 17 100/1000T | No Yes Down 1000FDx Auto off 0 18 100/1000T | No Yes Down 1000FDx Auto off 0 19 100/1000T | No Yes Down 1000FDx NA off 0 20 100/1000T | No Yes Down 1000FDx Auto off 0 21 100/1000T | No Yes Down 1000FDx NA off 0 22 100/1000T | No Yes Down 1000FDx Auto off 0 23 100/1000T | No Yes Up 100FDx MDIX off 0 24 100/1000T | No Yes Down 100FDx NA off 0 25 | No Yes Down . off 0 26 | No Yes Down . off 0 27 | No Yes Down . off 0 28 | No Yes Down . off 0 CQA-Piller-CCTV(config)#