Hi.
Support,,
I am new in Aruba controller 7010, just finish installed on-site ,my customer have diffrent vlan id at every floor ,L1-vlan id-15, L2-Vlan id =16 ,L3,vlan id =17 and L4 vlan id=18, I already configure SSID =Staff@Wifi, on site have 4 Access Point For Every Level so I group ap by level 1,2.3,4 The problem is when i try to tagg vlan id 15 in virtual ap (Ap Profile) the rest of the floor AP Group Follow also carry vlan 15, so only 1st.Floor can get ip address ,the other Level failed caused Tagg on diffrent Vlan ID.. Our Customer POE Switch is Aruba 2930 Poe 2SFP. how do I need to solve the problem.
Thanks In Advance...
------------------------------
Mohd Fakri Bin Ramli
------------------------------