Community Feedback

 View Only
last person joined: 2 days ago 

How is the community doing? Do you have any questions or feedback related for the Airheads Community team? This is the place to let us know.
Back to discussions
Expand all | Collapse all

S2500-48P POE Port Schedule

This thread has been viewed 9 times

  • 1.  S2500-48P POE Port Schedule

    Posted Mar 04, 2022 01:57 PM
    Hi,
    I was wondering if there is a way to schedule a switch port to auto turn on and off on my S2500 POE switch.
    Any advice would be greatly appreciated.
    Thanks,
    Pedro

    ------------------------------
    pa si
    ------------------------------


  • 2.  RE: S2500-48P POE Port Schedule

    EMPLOYEE
    Posted Apr 11, 2022 12:02 PM
    Not that I'm aware in the switch itself. Your management platform may provide such a feature.

    Note that the S2500 Mobility Access Switches are end-of-support and for critical production it may be good to move to a still-supported product.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: S2500-48P POE Port Schedule

    EMPLOYEE
    Posted Apr 29, 2022 02:43 PM
    There certainly is using a time-range profile.  This is what I have on my S1500 switch.

    Define a time-range-profile and assign it to your poe-profile.

    #show time-range-profile bedtime

    PoE time-range "bedtime" (N/A)
    ------------------------------
    Parameter Value
    --------- -----
    Time range mode periodic
    Absolute time-range N/A
    Periodic time-range Daily 05:00 Daily 23:59

    # show interface-profile poe-profile bedtime

    Power over Ethernet profile "bedtime" (N/A)
    -------------------------------------------
    Parameter Value
    --------- -----
    Enable PoE interface Enabled
    Max Power on PoE port milliwatts 30000
    PoE port priority low
    time-range-profile bedtime

    As you can probably gather, this turns on the Poe at 0500 and turns it off at 23:59.

    ------------------------------
    Michael Clarke
    ------------------------------

    Original Message