Wired Intelligent Edge

 View Only
last person joined: 8 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

New Log Error in VSF: Diagnostic emmc failed

This thread has been viewed 5 times

  • 1.  New Log Error in VSF: Diagnostic emmc failed

    Posted Apr 25, 2022 10:47 AM
    6300F VSF member 3 of 6 started throwing the following error message overnight. It shows up every 15-30 minutes.

    .... Event|3001|LOG_ERR|MMBR|3|Diagnostic emmc failed with error code 0x80000001 on management module 3/1


    Is this a potential hardware failure? Maintenance window and scheduled reboot Sunday morning (72 hours).

    ----
    As an aside, is there a library of error codes that is available? I manage almost 200 Aruba devices, and seems like there is some new error or warning message every day that I'm not quite sure how important they are.

    Thank you in advance.

    ------------------------------
    Dewayne Cushman
    ------------------------------


  • 2.  RE: New Log Error in VSF: Diagnostic emmc failed

    MVP GURU
    Posted Apr 27, 2022 12:05 PM
    Hi, have a look at this (similar) thread. Documentation can be found on ASP asp.arubanetworks.com (for Switches here).

    ------------------------------
    Davide Poletto
    ------------------------------

    Original Message