Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Aruba Switch 3810 MIBS (OID value and Trap Name) for stack health

This thread has been viewed 18 times

  • 1.  Aruba Switch 3810 MIBS (OID value and Trap Name) for stack health

    Posted Apr 20, 2022 11:16 AM
    Hi All

    Hope you are doing well

    I am facing a issue to monitor stack health for Aruba JL074A 3810M-48G-PoE+-1-slot Switch , version KB.16.09.0015  from Centreon Monitoring tool ,I have imported the required MIB from "MIBs-May-2019"
    But couldn't find the trap name and OID value for stack 

    Can any one help me to moving out from here 

    Any help much apricated

    Thanks
    Debabrata

    ------------------------------
    Debabrata Majhi
    ------------------------------


  • 2.  RE: Aruba Switch 3810 MIBS (OID value and Trap Name) for stack health

    EMPLOYEE
    Posted May 06, 2022 03:58 AM
    Hi Debabrata,

    "But couldn't find the trap name and OID value for stack"

    If you mean OIDs to monitor stacking information like stacking topology, status of stacking etc. you can check the hpStackMIB (1.3.6.1.4.1.11.2.14.11.5.1.69) and it's sub-mibs. 
    For example:
    hpStackOperStatus - 1.3.6.1.4.1.11.2.14.11.5.1.69.1.1.2 will give you information about the operational status of the stack, the meaning of the integer result is:
    unAvailable(0), disabled(1), active(2), fragmentInactive(3), fragmentActive(4)

    Similarly you can also get the stacking topology using:
    hpStackTopology - 1.3.6.1.4.1.11.2.14.11.5.1.69.1.1.4
    unKnown(0), chain(1), ring(2), mesh(3), partialMesh(4)

    An example below:
    stacking# walkMIB 1.3.6.1.4.1.11.2.14.11.5.1.69.1.1.2
hpStackOperStatus.0 = 2
stacking# walkMIB 1.3.6.1.4.1.11.2.14.11.5.1.69.1.1.4
hpStackTopology.0 = 2
stacking# sh stacking

Stack ID : 00037010-6f8cc480

MAC Address : 70106f-******
Stack Topology : Ring
Stack Status : Active
Split Policy : One-Fragment-Up
Uptime : 64d 0h 26m
Software Version : KB.16.11.0003

Mbr
ID Mac Address Model Pri Status
--- ----------------- ------------------------------------- --- ---------------
1 70106f-****** Aruba JL071A 3810M-24G-1-slot Switch 255 Commander
2 70106f-****** Aruba JL072A 3810M-48G-1-slot Switch 200 Member
*3 70106f-****** Aruba JL071A 3810M-24G-1-slot Switch 128 Standby
​


    On the linked page for hpStackMIB you can also find other OIDs which you might find useful. (for stack member status, id, uptime etc.)

    HTH

    Toni



    ------------------------------
    Toni Andreev
    ------------------------------

    Original Message