I have two 6300 switches setup with VRRP
Switch1:
interface vlan60
ip address 192.168.60.2/24
ip ospf 1 area 0.0.0.0
ip ospf passive
vrrp 1 address-family ipv4
address 192.168.60.1 primary
version 3
no preempt
no shutdown
exit
Switch2:
interface vlan60
ip address 192.168.60.3/24
ip ospf 1 area 0.0.0.0
ip ospf passive
vrrp 1 address-family ipv4
address 192.168.60.1 primary
version 3
no preempt
no shutdown
exit
I use the .1 virtual address as the default gateway for the subnet and everything routes as expected. The only issue is that I'm unable to ping the .1 virtual address even though both the .2 and .3 addresses ping fine. Is that normal or am I missing a configuration item that would enable it? It's not critical for my setup but it seemed odd today when I was troubleshooting an issue and couldn't ping my gateway.
------------------------------
David King
------------------------------