Aruba Central

Hi!

If I have cluster with 128 APs in Central and I need most of them (for example 120 APs) not transmitting one SSID of all my SSIDs, is there any other way instead of entering each AP and put a Zone on each of them?

I would make the SSID a part of a zone that you want ot apply. If the SSID is not part of a zone, it will broadcast to all APs that are not in a zone. For instance:

SSID to selectively broadcast = Zone 1
SSID to broadcast on all = No Zone

Put the APs you want the selective SSID to be broadcast into Zone 1. The non-zone SSIDs will still broadcast on the AP in that zone.

------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos
------------------------------

Original Message:
Sent: Sep 29, 2022 06:31 AM
From: Robert Akopov
Subject: Zoning

Hi!

If I have cluster with 128 APs in Central and I need most of them (for example 120 APs) not transmitting one SSID of all my SSIDs, is there any other way instead of entering each AP and put a Zone on each of them?

Thank you. I've done this and it worked. Would it also work if I have for instance 3 zones?
Original Message:
Sent: Sep 29, 2022 11:46 AM
From: Dustin Burns
Subject: Zoning

I would make the SSID a part of a zone that you want ot apply. If the SSID is not part of a zone, it will broadcast to all APs that are not in a zone. For instance:

SSID to selectively broadcast = Zone 1
SSID to broadcast on all = No Zone

Put the APs you want the selective SSID to be broadcast into Zone 1. The non-zone SSIDs will still broadcast on the AP in that zone.

------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos

Original Message:
Sent: Sep 29, 2022 06:31 AM
From: Robert Akopov
Subject: Zoning

Hi!

If I have cluster with 128 APs in Central and I need most of them (for example 120 APs) not transmitting one SSID of all my SSIDs, is there any other way instead of entering each AP and put a Zone on each of them?

Yep!

------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos
------------------------------

Original Message:
Sent: Sep 30, 2022 03:31 AM
From: Robert Akopov
Subject: Zoning

Thank you. I've done this and it worked. Would it also work if I have for instance 3 zones?
Original Message:
Sent: Sep 29, 2022 11:46 AM
From: Dustin Burns
Subject: Zoning

I would make the SSID a part of a zone that you want ot apply. If the SSID is not part of a zone, it will broadcast to all APs that are not in a zone. For instance:

SSID to selectively broadcast = Zone 1
SSID to broadcast on all = No Zone

Put the APs you want the selective SSID to be broadcast into Zone 1. The non-zone SSIDs will still broadcast on the AP in that zone.

------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos

Original Message:
Sent: Sep 29, 2022 06:31 AM
From: Robert Akopov
Subject: Zoning

Hi!

If I have cluster with 128 APs in Central and I need most of them (for example 120 APs) not transmitting one SSID of all my SSIDs, is there any other way instead of entering each AP and put a Zone on each of them?

Thank a lot!
Original Message:
Sent: Sep 30, 2022 07:15 AM
From: Dustin Burns
Subject: Zoning

Yep!

------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos

Original Message:
Sent: Sep 30, 2022 03:31 AM
From: Robert Akopov
Subject: Zoning

Thank you. I've done this and it worked. Would it also work if I have for instance 3 zones?
Original Message:
Sent: Sep 29, 2022 11:46 AM
From: Dustin Burns
Subject: Zoning

I would make the SSID a part of a zone that you want ot apply. If the SSID is not part of a zone, it will broadcast to all APs that are not in a zone. For instance:

SSID to selectively broadcast = Zone 1
SSID to broadcast on all = No Zone

Put the APs you want the selective SSID to be broadcast into Zone 1. The non-zone SSIDs will still broadcast on the AP in that zone.

------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos

Original Message:
Sent: Sep 29, 2022 06:31 AM
From: Robert Akopov
Subject: Zoning

Hi!

If I have cluster with 128 APs in Central and I need most of them (for example 120 APs) not transmitting one SSID of all my SSIDs, is there any other way instead of entering each AP and put a Zone on each of them?