Check
this search. There is that page posted above, but another one with the syntax explained and an example config using it.
Unsure if an OR function is supported.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Dec 08, 2021 09:18 AM
From: Danny van der Aa
Subject: Template syntax guide
Hi Dustin,
Also this is useful, but not what i ment.
I am looking for the operators i can use.
So the if statements, but also the operators like AND & OR.
For example i would like to use something like
%if a=1 or b=2%
description test
%endif%
------------------------------
Danny van der Aa
Original Message:
Sent: Dec 08, 2021 08:08 AM
From: Dustin Burns
Subject: Template syntax guide
Is this what you are looking for?
https://help.central.arubanetworks.com/2.5.4/documentation/online_help/content/nms/maintenance/template-variables.htm
------------------------------
Dustin Burns
Lead Mobility Engineer @WEI
ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
If my post was useful accept solution and/or give kudos
Original Message:
Sent: Dec 08, 2021 02:00 AM
From: Danny van der Aa
Subject: Template syntax guide
Hi all,
Is there documentation available about the syntaxes you can/can't use in Aruba Central Templates.
For example I am interested in operators like AND & OR.
Hope someone can help
------------------------------
Danny van der Aa
------------------------------