Wired

I couldn't find information about the core switch 5406Rzl2 (J9850A) that can support which network module? It only has the new part number of the core switch (J9821A).

Could you please advise on the compatibility of the Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module (J9995A) and Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9993A) with the core switch 5406Rzl2 (J9850A)?

Thank you

Hello, 

Both modules are supported with minimum version KB.15.17.0003.

For reference:
Release Notes, page 8
https://www.arubanetworks.com/techdocs/AOS-Switch/RN/16.10/AOS-S%20Switch%2016.10.0019%20Release%20Notes.pdf

Specifications, page 19
https://www.hpe.com/psnow/doc/c04293383?section=Document%20Types&r=none

As far as I know the product number J9850A is the bare 6 slot chassis-without fans, power supplies and management modules. This part is never sold separately but always as a part of a bundle which has a separate product number. For example your switch product number J9821A  is a bundle including the chassis, a single management module and a single fan tray.


------------------------------
Emil Gogushev
------------------------------

Original Message:
Sent: Feb 03, 2022 07:56 AM
From: Somkiat Detsuchon
Subject: Aruba Switch 5406Rzl2 (J9850A) new network module support?

I couldn't find information about the core switch 5406Rzl2 (J9850A) that can support which network module? It only has the new part number of the core switch (J9821A).

Could you please advise on the compatibility of the Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module (J9995A) and Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9993A) with the core switch 5406Rzl2 (J9850A)?

Thank you