So it turned out to be some kind of syncing issue. The web GUI says the time range profiles are not enabled but when in the CLI and checking the config they are enabled. I haven't heard back from Aruba Support although they did finally get someone assigned to my ticket
The curious thing is, at one point we deleted the time range profiles so they don't even show up in the gui anymore but they are still showing and enabled in the config. I'm wondering if I should save the running-config and reboot the VC and/or swarm whether those time range profiles will re-appear in the web GUI?
------------------------------
Marco Bartholomew
------------------------------
Original Message:
Sent: Oct 28, 2021 12:41 PM
From: Marco Bartholomew
Subject: SSIDs disappearing
We have 4 SSIDs running on a network of 22 Aruba Instant On APs. All was well and then we discovered that a couple of the SSIDs were disappearing during non-business hours, as if they were on a schedule. It became very apparent when we started doing Saturday shifts again and there was no wifi available except for our corporate SSID
We have defined some Time Range profiles but we have not enabled them
Is there some setting we are overlooking, perhaps something we configured during original setup and forgot about? The dashboard reports that all SSIDs are enabled when this happens, but I am unable to add one manually so I don't think the SSIDs are hidden
Any ideas on what we should be looking for, in the logs, config, or elsewhere?
Thanks much for any assistance!
------------------------------
Marco Bartholomew
------------------------------