Security

 View Only
last person joined: yesterday 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

Clearpass act as Radius to Forti AP's

This thread has been viewed 15 times

  • 1.  Clearpass act as Radius to Forti AP's

    Posted May 05, 2022 12:18 PM

    We have a client that has An Aruba infrastructure at main site with MM and Clearpass CLuster ( 6.10.5)

    At some remote sites will have Fortigate with Forti AP

    The ideia is to have the clients to come to the Radius CPPm coming from the remote sites ( some ssid as the main site) and connect via AD source and Radius to the wifi

    So for this what is need on the Aruba side? ( of course the Forti side is not my bad and my config - routing and all the things done by the client)

    1- Create NAD devices for remote Fortigates under devices?
    2 Create a Radius service 802.1x?

    Anything else?

    Hope I made it clear


    Regards

     



    ------------------------------
    Bruno Costa
    ------------------------------


  • 2.  RE: Clearpass act as Radius to Forti AP's

    MVP EXPERT
    Posted May 06, 2022 03:34 AM
    In short yes, if CPPM is acting as the Authentication Server for the Forti AP then a NAD, Auth Source, Service and Enforcement Profile is required. Take a look at the below as this will help

    https://www.arubanetworks.com/techdocs/ClearPass/6.10/PolicyManager/Content/CPPM_UserGuide/Services/ServiceTemplates_8021x.htm

    ------------------------------
    Craig Syme
    ------------------------------

    Original Message