I have deployed aos-cx vm in my VMware server and noticed that all my ports are using same Mac address which not correct.
if you have same issue, please let me know what you did to solve it.
thanks!
using code = ArubaOS-CX:Virtual.10.07
aos-cx-01# show int 1/1/1
Interface 1/1/1 is up
Admin state is up
Link state: up
Link transitions: 0
Description: SF_WAN_Uplink
Hardware: Ethernet, MAC Address: 08:00:09:61:b7:0c
IPv4 address 10.110.40.1/24
MTU 1500
Type --
Full-duplex
qos trust none
Speed 1000 Mb/s
L3 Counters: Rx Disabled, Tx Disabled
Auto-negotiation is off
Flow-control: off
Error-control: off
MDI mode: none
Rate collection interval: 300 seconds
<snippet>...
aos-cx-01# show int 1/1/3
Interface 1/1/3 is up
Admin state is up
Link state: up
Link transitions: 0
Description: LA_WAN_ECV01_Uplink
Hardware: Ethernet, MAC Address: 08:00:09:61:b7:0c
IPv4 address 10.110.51.1/24
MTU 1500
Type --
Full-duplex
qos trust none
Speed 1000 Mb/s
L3 Counters: Rx Disabled, Tx Disabled
Auto-negotiation is off
Flow-control: off
Error-control: off
MDI mode: none
Rate collection interval: 300 seconds
aos-cx-01# show run int 1/1/1,1/1/3
interface 1/1/1
no shutdown
vrf attach SF_SD-WAN
description SF_WAN_Uplink
ip address 10.110.40.1/24
ip ospf 1 area 0.0.0.0
no ip ospf passive
exit
interface 1/1/3
no shutdown
vrf attach LA_SD-WAN
description LA_WAN_ECV01_Uplink
ip address 10.110.51.1/24
exit
!
------------------------------
Rod K.
------------------------------