In the documentation for 5700 and 58xx series (BTW, 58xx are running Comware 5, old and unsupported) there is no mention for LDAPS or LDAP over TLS. The command 'protocol-version' has only two arguments: 'v2' and 'v3', so I am afraid when you point the port 636, the switch tries to use clear-text LDAP on that port, not TLS, that is the most probable cause why it fails.
------------------------------
Ivan Bondar
------------------------------
Original Message:
Sent: Apr 08, 2022 04:23 PM
From: ana medera
Subject: Authentication for SSH users by an LDAPS
LDAP for ssh authentication works fine.
ip 10.10.10.10 port 389
Does the HP flexFabric 5700, 5800 support LDAPS? The LDAPS always displays "access denied"
ip 10.10.10.10 port 636
I followed the instructions to setup LDAP:
HPE FlexFabric 5710 Switch Series Security Configuration Guide
https://techhub.hpe.com/eginfolib/networking/docs/switches/5710/5200-5002_security_cg/content/index.htm
reagrds
medera
------------------------------
ana medera
------------------------------