Comware

 View Only
last person joined: yesterday 

Back to discussions
Expand all | Collapse all

Unable to Assign SSL Server Profile to Default HTTPS Port on HP Series Router

This thread has been viewed 6 times

  • 1.  Unable to Assign SSL Server Profile to Default HTTPS Port on HP Series Router

    Posted Sep 15, 2022 10:02 AM
    Hi all, 

    Appreciate if someone can help me out with this. I am trying to apply SSL server policy to default HTTPS port on the HP MSR series router running Comware 7. I followed the steps in the config guide listed below:

    system-view
    ip https ssl-server-policy mysslprofile
    ip https enable

    However, I keep getting the error "Failed to enable HTTPS server because of port conflict."

    If I change the default HTTPS port to 8443, it then allows me to apply the SSL server policy with no issues and everything works as expected -

    system-view
    ip https ssl-server-policy mysslprofile
    ip https port 8443
    ip https enable

    However, after changing HTTPS port to 8443, I notice that the router is still listening on port 443. How can I achieve either of the below?

    1) Apply the SSL server policy to the default HTTPS port 443 OR
    2) Use port 8443 for HTTPS but turn off port 443. 

    Router version is HPE Comware Software, Version 7.1.064, Release 0809P33

    Regards, 
    Steven


  • 2.  RE: Unable to Assign SSL Server Profile to Default HTTPS Port on HP Series Router

    Posted Sep 18, 2023 04:44 PM

    hello 
    hope You are doing well 
    may I ask You, please  eighter you have a solution by now or no
    Thank You 


    Original Message


  • 3.  RE: Unable to Assign SSL Server Profile to Default HTTPS Port on HP Series Router

    Posted Sep 26, 2023 03:01 AM

    Hi,

    I was not able to find a solution and decided not to use this router anymore. 

    Steven


    Original Message