In the monitoring pages in Aruba Central, the IP address for the connected wired clients on AOS-CX switches might not be displayed if the Client IP tracker is not enabled on the switch.
you can enable "client IP track" either from the Template based groups or using Multiedit.
Here is the commands you need.
https://www.arubanetworks.com/techdocs/AOS-CX/10.09/HTML/cli_6200/Content/Chp_IPClientTrack/IPClientTrack_cmds/cli-tra-ip.htm------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------
Original Message:
Sent: Feb 15, 2022 06:51 AM
From: Alon Haber
Subject: Can I see Client's IP address for a Layer 2 switch on Central?
Hi,
I am wondering if I can see the client's IP address under the "Client" Tab in a specific switch.
This is a VSF of 5 6200 switches that do only layer 2.
Best regards,
------------------------------
Alon Haber
------------------------------