since you can apply BW contracts per user role, is there any way you can separate the users in different user roles?
you can have different user roles on the same VLAN as well.
so do the same users that access Internet also have access to the servers?
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------
Original Message:
Sent: Sep 29, 2022 11:38 AM
From: Dustin Burns
Subject: Destination Based bandwidth management via Access Point
You can apply bandwidth contracts to roles and applications. Not for destinations.
------------------------------
Dustin Burns
Lead Mobility Engineer @Worldcom Exchange, Inc.
ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos
Original Message:
Sent: Sep 28, 2022 08:41 AM
From: Asad Mirza
Subject: Destination Based bandwidth management via Access Point
Is there anyone to confirm me that can I configure bandwidth limit separately for internet access and server access (means different subnets source and destination based) while connected same SSID. In other words, I want to configure bandwidth management on a single SSID connected users to access internet via 5 mbps bandwidth limit and access server via 20 mbps bandwidth. Note Users whose connected to SSID are different subnet and servers subnet is different. I have Aruba 505 Access Point in my network without hardware controller.