Wireless Access

 View Only
last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

Aruba 535 Ap not broadcasting SSID deployed in Instant Mode

This thread has been viewed 17 times
  • 1.  Aruba 535 Ap not broadcasting SSID deployed in Instant Mode

    Posted Sep 19, 2022 01:04 PM
    I have two 535 Aruba AP that are connected to our Network ,am able to log in using the browser and set up SSID but once the changes are done they are not visible on the Network,The SSID.


  • 2.  RE: Aruba 535 Ap not broadcasting SSID deployed in Instant Mode

    Posted Sep 20, 2022 10:36 AM
    Could you provide any more info? You'll receive much better help if you give more details.

    ------------------------------
    ACNSA | ACEA | ACCP | ACMP
    ------------------------------



  • 3.  RE: Aruba 535 Ap not broadcasting SSID deployed in Instant Mode

    Posted Sep 20, 2022 10:46 AM

    The two access point are connected to the switch which has internet and we can ssh into the access point.The ping to the internet are going through.I deployed them in an instant Mode .

     

    Sent from Mail for Windows

     






  • 4.  RE: Aruba 535 Ap not broadcasting SSID deployed in Instant Mode

    Posted Sep 20, 2022 10:53 AM
    Can you share a screenshot of the SSID you configured?

    Again, please provide more details if you would like someone to help :)

    ------------------------------
    ACNSA | ACEA | ACCP | ACMP
    ------------------------------



  • 5.  RE: Aruba 535 Ap not broadcasting SSID deployed in Instant Mode

    Posted Sep 20, 2022 11:07 AM

    Hi I have attached the Show tech-support output and screenshot of the SSID

     

     

    Here is the pic of the SSID

    Sent from Mail for Windows

     






  • 6.  RE: Aruba 535 Ap not broadcasting SSID deployed in Instant Mode

    Posted Sep 20, 2022 12:43 PM

    Lewis,

    Can you SSH into the virtual controller and run a "show run" command? Delete any sensitive information and post the results. This will allow us to help you.

    Thanks,

    Brad

     






  • 7.  RE: Aruba 535 Ap not broadcasting SSID deployed in Instant Mode

    Posted Sep 21, 2022 03:36 AM
    We don't have Virtual Controller, we trying to deploy them without the Controller .



  • 8.  RE: Aruba 535 Ap not broadcasting SSID deployed in Instant Mode

    EMPLOYEE
    Posted Sep 21, 2022 08:52 AM
    One of your APs is automatically the 'VC' or virtual controller. You can SSH to it, or get the running configuration from the WebUI as well:

    Also, from the Support menu get the output of 'AP BSSID table':
    ... and the AP Log Wireless:


    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------