If this is a new setup, and you don't have any experience, it may be good to request assistance from your Aruba partner. There is a 5-day training that covers many scenarios, and how to properly design it (and license). If you don't have that, it's likely that you will spend a lot of time where an experienced engineer can set it up in hours rather days or weeks.
Here is a video series, if you really want to get started and do it yourself.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Feb 25, 2022 11:51 AM
From: Prefeitura de Sorocaba
Subject: Add Aruba 505 APs to a 7210 Wcontroller.
We are fairily new to Aruba.
just got a new 7210 controller and a lot of 505 radios (200). We start the controller fine, but it wont find any of the APs and they just start their virtual controller.
Anyone ever paired these APs with a 7210 controller?
any idea what would be the correct approach?
------------------------------
Prefeitura de Sorocaba
------------------------------