SW : R8N87A 6000 24G CL4 4SFP Swch 6000# sh ip int bInterface IP Address Interface Status
vlan1 2.2.2.2/24 up/up
6000# show power-over-ethernet briefPower Status
Available: 370.00 W Reserved: 8.91 W Remaining: 361.09 W
PoE Pwr Power Pre-std Alloc PSE Pwr PD Pwr PoE Port PD Cls Type
Port Ena Priority Detect Act Rsrvd Draw Status Sign
-------- --- -------- ------- ------------- ------- ------ ------------ ------ --- ----
1/1/12 Yes low Off lldp-dot3 8.9 W 8.3 W delivering N/A 4 2
AP : AP-635# sh ip int bInterface IP Address / IP Netmask Admin Protocol
br0 2.2.2.3 / 255.255.255.0 up up
br0.3333 172.31.98.1 / 255.255.254.0 up up
# sh verAruba Operating System Software.
ArubaOS (MODEL: 635),
Version 8.9.0.0I set DHCP on the switch and the AP binds the IP.
All I have set up is this.
Why not broadcast the SetMeUp SSID?
What should I check?