We have 4 Aruba Switch Stacks.
The Core Switch Stack is a J9822A Aruba 5412R zl2 currently running KB.16.03.0004
On the Core Switch I am able to issue the following command:
copy tftp flash 192.168.20.116 KB.16.05.0013 secondary
The other 3 Switch Stacks are comprised of Aruba JL322A Switches running WC.16.10.0015
I am preparing to upgrade these switches but am having issues with the CLI Commands.
On the JL322A Switches, the command "copy tftp..." does not exist.
I checked thw switches for tftp configuration and they each have the "no tftp server" configuration.
This would be tftp client, so I tried to enable it just in case "tftp client". Again the "tftp ..." command is not supported.
I am however able to backup the current configuration using tftp:
example: copy startup-config tftp 192.168.20.116 20240313_1st-FloorSwitchCloset_dbw.cfg
I don't understand why the JL322A Switches or possibly the current firmware (WC.16.10.0015) on these switches is not allowing me to use the "copy tftp ..." command.
Thank you,
Dave