If you refer to the 'next-gen GUI',
it's not expected to work on the 2620 either:
Supported Platforms
Aruba 2930F |
Aruba 5400R |
Aruba 3810M |
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jan 23, 2023 06:02 AM
From: andi0972
Subject: 3500yl - 48G User Interface Style
Hello,
i have a HP Switch HP-2620-48-PoEP and a HP-3500yl-48G
On the 2620 i can configure an activate the Improved GUI
HP-2620-48-PoEP(config)# web-management
idle-timeout Configure the idle timeout for web management sessions.
interface Configure the web management user interface style.
On the HP-3500yl-48G i can't configure the web management user interface style
HP-3500yl-48G(config)# web-management
idle-timeout Set the idle timeout for the web management sessions.
management-url Specify URL for the web interface [?] button.
plaintext Enable the HTTP server (insecure).
ssl Enable the HTTPS server (secure).
support-url Specify URL for the web interface Support page.
<cr>
Software revision : K.16.02.0036
Does anyone have an idea how i can activate this on the HP-3500yl-48G?
Thank you