Hi, check your product number. If you have S0M83A as writed, it does not support SFP+, just SFP. All the S0M* is without 10GE.
You can verify your product using the command show system and look at the product name
test-deploy# show system
Hostname : test-deploy
System Description : ML.10.13.0010
System Contact :
System Location :
Vendor : Aruba
Product Name : JL725A 6200F 24G CL4 4SFP+370W Swch
------------------------------
Arne Opdal
------------------------------
Original Message:
Sent: Mar 01, 2024 04:16 PM
From: BuzzedDarkYear
Subject: 6200F (S0M83A) compatible DAC
It would seem that the Aruba CX 6200F does support SFP+ transceivers per this link https://www.arubanetworks.com/techdocs/Switches/xcvrs/5200-3362/index.html#GUID-D7147C7F-2016-0901-0A24-00000000049C.html
If I am mistaken please let me know as I have just gotten 6200F switches with SFP+ Transceivers Product: J9150D Part#: 1990-4391 Aruba 10G SFP+ LC SR 300m MMF XCVR for 2 of my switches and if they will not work I need to get them replaced before I put them into production.
Original Message:
Sent: Feb 16, 2024 04:13 AM
From: ArneO
Subject: 6200F (S0M83A) compatible DAC
Your switch don't have any SFP+ ports, just SFP - so you can't use 10GE on your switch.
HPE Aruba Networking 6200F 48G 4SFP Switch (S0M83A)
- 48x ports 10/100/1000BaseT ports
- 4x 100M/1G SFP ports
- Internal (fixed) power supply, fixed fans
- Dimensions: (H) 4.37 cm x (W) 44.25 cm x (D) 28.45 cm (1.72" x 17.42" x 11.2")
- Weight: 3.90 kg (8.59 lbs)
- TAA Model SKU: S0G15A
------------------------------
Arne Opdal
Original Message:
Sent: Feb 14, 2024 10:59 AM
From: g24x
Subject: 6200F (S0M83A) compatible DAC
Hi,
I am trying to set up a stack of two 6200F (S0M83A) switches. I use a J9281D DAC cable and I follow this guide. After the auto-stacking failed I started to troubleshoot and I found this:
show interface 1/1/49
Interface 1/1/49 is down
Admin state is up
State information: Incompatible interface
Link state: down for 28 minutes (since Wed Feb 14 15:27:16 UTC 2024)
Link transitions: 0
Description:
Persona:
Hardware: Ethernet, MAC Address: 4c:d5:87:8b:3f:90
MTU 9281
Type 10G-DAC1 / 10G SFP+ 1m DAC
Full-duplex
qos trust none
Speed 0 Mb/s
Auto-negotiation is off
Flow-control: off
Error-control: off
Rate collection interval: 300 seconds
Rate RX TX Total (RX+TX)
---------------- -------------------- -------------------- --------------------
Mbits / sec 0.00 0.00 0.00
KPkts / sec 0.00 0.00 0.00
Could somebody please help me? Did I purchase the wrong cable?
Thanks a lot
------------------------------
Kind regards,
Gabor
------------------------------