For reasons that are historical and no longer apply in the real world but still impact the software, the AP will not normally operate on any channel that either isn't a PSC or that includes a PSC. Please make sure to enable ALL of the available 6 GHz channels for your regulatory domain. We are working on changes that will allow 20 MHz and 40 MHz operation on the non-PSC but that doesn't exist yet.
With your current setup, the behavior is as currently designed and completely expected.
------------------------------
Carson Hulcher, ACEX#110
------------------------------
Original Message:
Sent: Jun 07, 2024 02:22 AM
From: gh.as
Subject: 6Ghz issue on AP 655
Hello,
For info: we remove 5 and 53 channels to see how is going with new configuretion, since 2 days all aps in 6Ghz stick on channel 21 and 37 and did not chage enven if after airmatch time,
regulatory domain is FR,
Yes, All channel allowed for operation,
see image below:
Original Message:
Sent: Jun 06, 2024 09:42 AM
From: chulcher
Subject: 6Ghz issue on AP 655
I'd recommend opening a case with TAC to troubleshooting the AirMatch solution.
What regulatory domain? What's the channel size set to? Are all channels allowed for operation?
------------------------------
Carson Hulcher, ACEX#110
Original Message:
Sent: Jun 06, 2024 02:01 AM
From: gh.as
Subject: 6Ghz issue on AP 655
Hello,
My question is why always 6Ghz stick only on 2 channels 5 or 53 even if after airmatch and also taken max EIRP?
Best,
Original Message:
Sent: Jun 05, 2024 10:03 AM
From: chulcher
Subject: 6Ghz issue on AP 655
What is the question?
------------------------------
Carson Hulcher, ACEX#110
Original Message:
Sent: Jun 05, 2024 03:33 AM
From: gh.as
Subject: 6Ghz issue on AP 655
Hello guys;
We are running MC 8.10.0.12 with 1 cluster with 2 controller. We enabled 6Ghz radio in our new 655 Aps and its around 2 weeks 6Ghz channel stick on channel 5 or 53.
Aps place are far form each other and we try to respect Aruba standard.
in Ap group-->radio--> 6ghz we have enabled Advertise 802.11d and 802.11h and also CSA with defaul number(4).
is disbale
Beacon Rate is default
Do you have any idea?
Best,