Network Management

 View Only
last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

aaa authentication local-user not working until Radius Client Disabled on NPS

This thread has been viewed 20 times

  • 1.  aaa authentication local-user not working until Radius Client Disabled on NPS

    Posted Mar 19, 2023 07:56 PM

    Dear Friends, 

    I was trying to add a local user with a certain permissions by:

    aaa authorization commands local 

    aaa authorization group "ReadOnlyGroup" 100 match-command "command:ssh" permit

    aaa authorization group "ReadOnlyGroup" 102 match-command "command:copy *" permit

    aaa authentication local-user "readonlyconfig" group "ReadOnlyGroup" password plaintext

    Seems only works if I disable Radius Client. 

    Any idea how I can fix it? 

    Thanks,
    ML



  • 2.  RE: aaa authentication local-user not working until Radius Client Disabled on NPS

    EMPLOYEE
    Posted Mar 20, 2023 10:54 AM

    See if this applies to you:  https://www.arubanetworks.com/techdocs/ArubaOS_8.10.0_Web_Help/Content/arubaos-solutions/manage-utilities/disa-auth-lmua.htm



    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    HPE Design and Deploy Guides: https://community.arubanetworks.com/support/migrated-knowledge-base?attachments=&communitykey=dcc83c62-1a3a-4dd8-94dc-92968ea6fff1&pageindex=0&pagesize=12&search=&sort=most_recent&viewtype=card
    ------------------------------

    Original Message


  • 3.  RE: aaa authentication local-user not working until Radius Client Disabled on NPS

    Posted Mar 20, 2023 08:15 PM

    Hi @cjoseph , thanks for that, I dont think that is enabled. 

    Any other way I can try? 

    Thanks

    Mang


    Original Message


  • 4.  RE: aaa authentication local-user not working until Radius Client Disabled on NPS

    EMPLOYEE
    Posted Mar 21, 2023 05:19 AM

    What type of device are you trying to configure? AP? Controller? Switch?

    What model and version?



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 5.  RE: aaa authentication local-user not working until Radius Client Disabled on NPS

    Posted Mar 21, 2023 06:02 AM

    @herman rober Hi Herman, it is 2950M switch with OS version: 

    Software revision  : WC.16.11.0008

    Any suggestions? 

    Thanks

    ML


    Original Message