Atmosphere 2021

 View Only
last person joined: 10 days ago 

Back to discussions
Expand all | Collapse all

AAA removal from 2930F Switchport

This thread has been viewed 16 times

  • 1.  AAA removal from 2930F Switchport

    Posted May 16, 2023 10:45 AM

    I just have one small issue. I have Radius auth working for switch ports using the following commands for port 19:

        aaa port-access authenticator 19

        aaa port-access authenticator 19 client-limit 4

        aaa port-access mac-based 19

        aaa port-access mac-based 19 addr-limit 32

        aaa port-access 19 critical-auth voice-vlan

        aaa port-access 19 critical-auth data-vlan

        aaa port-access 19 auth-priority mac-based authenticator

        aaa port-access 19 auth-order authenticator mac-based

     

    However, if I want to remove the configs all are successfully being removed except:

      aaa port-access mac-based 19 addr-limit 32

     

    Can you please let me know how to remove? Is it that it can't be removed?

    Everything works, its just when I run command: show run int 19, I still see aaa port-access mac-based 19 addr-limit 32 under the port config.

     

    Any assistance would be greatly appreciated.



  • 2.  RE: AAA removal from 2930F Switchport
    Best Answer

    EMPLOYEE
    Posted May 17, 2023 01:43 PM

    Check here for an explanation. If you set the addr-limit to the default value of 1, it will disappear from the configuration.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: AAA removal from 2930F Switchport

    Posted May 18, 2023 04:54 PM

    Thanks Herman, this did the trick.

    Do you have a link to Wired/Switching forum?


    Original Message


  • 4.  RE: AAA removal from 2930F Switchport

    EMPLOYEE
    Posted May 25, 2023 12:18 PM

    Wired Intelligent Edge is here.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 5.  RE: AAA removal from 2930F Switchport

    EMPLOYEE
    Posted May 17, 2023 01:44 PM

    Please post such a question in the Wired/Switching forum, it has nothing to do with Atmosphere 2021.

    Check here for an answer.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message